Audi R8 - Rear - 2007 on - CP8080Z50 (RH) / CP8080Z51 (LH)
CP8080Z50 & Z51 use the latest "Float in the bell"
Mounting system, this allows axial and radial float and helps
eliminates drive bobbin rattle.
IMPORTANT NOTES:
- Directly replaces standard Ø355 x 32mm, 2 Piece disc with OEM calipers. - Before fitting new disc and bell assembly remove the OEM Brake caliper noise block by undoing the two Allen bolts.
Ø365 x 34mm Disc & Mounting Bobbin Kit Numbers:
- RH = CP8080Z50SD / - LH = CP8080Z51SD - Drilled disc face type.
- RH = CP8080Z50GA / - LH = CP8080Z51GA - 'J' Hook disc face type.
Ordering Note:
When ordering discs for first purchase mounting bells are also required. Because AP Racing discs use 12 mounting holes while OEM disc uses 10.
AP Racing Mounting Bell Part Number: - RH / LH = CP8080Z500
(2 off required).
(kits do not include brake pads)
IMPORTANT NOTES:
- Directly replaces standard Ø355 x 32mm, 2 Piece disc with OEM calipers. - Before fitting new disc and bell assembly remove the OEM Brake caliper noise block by undoing the two Allen bolts.
Ø365 x 34mm Disc & Mounting Bobbin Kit Numbers:
- RH = CP8080Z50SD / - LH = CP8080Z51SD - Drilled disc face type.
- RH = CP8080Z50GA / - LH = CP8080Z51GA - 'J' Hook disc face type.
Ordering Note:
When ordering discs for first purchase mounting bells are also required. Because AP Racing discs use 12 mounting holes while OEM disc uses 10.
AP Racing Mounting Bell Part Number: - RH / LH = CP8080Z500
(2 off required).
(kits do not include brake pads)